This contact glue, suitable for application with a spray gun and brush, is ideal for gluing upholstery fabric and car roofs . This glue is based on a polychloroprene component and solvents
*Presentation Format: 1 liter can
*Product Type: One-component contact glue based on polychloroprene and solvents
*Application: In the automotive industry, cork and upholstery is recommended for covering work. In footwear, especially recommended for assembling gluing on normal leather fabrics and those with high fat content. This glue's main characteristic is strong adhesion, as well as high temperature resistance (ideal for work that requires prolonged periods in an expansion oven). On fabric other than upholstery, apply a small amount.
*Application Method: Shake the can of glue well before use. Remove dust from surfaces previously prepared for gluing. Apply the glue to the gun, leaving it to dry according to the drying time indicated above. (If you have exceeded the open time, you must reactivate as indicated). Press at +- 6 kg/cm2 for 10/12 seconds.
*Storage: This product must be stored in a well-ventilated place, in its original, tightly closed packaging, protected from humidity and sunlight, and at temperatures not lower than 10°C. Under these conditions the product is valid for 6 months.
*Technical Characteristics:
|
Value
|
Unit |
Method of Rehearsal
|
Viscosity (Brookf.RVTD-Spindle 3.20rpm, 20º) |
400-600 |
cPs |
ME006 |
Solid content
|
15-19 |
% |
ME007 |
Density
|
0.8-0.86 |
g/cm3 |
ME009 |
*Technical Advice:
|
Value
|
Color
|
Reddish
|
Drying Time
|
10-15min |
Open Time (cold gluing)
|
10-35min |
Reactivation (after open time)
|
50ºC |
Heat resistance (creep test)
|
120ºC |